產品說明 Product description ◎RX-868中空玻璃丁基膠是一種單組份、無溶劑、不出霧、不硫化、具有較好塑性的中空玻璃用第一道密封膠。RX-868中空玻璃丁基膠在較寬溫度范國內保持其塑性和密封性，且表面不開裂、不變硬， 具有優異的抗老化性。它對玻璃、鋁合金、鍍鋅鋼、不銹鋼等材料具有優異的粘合性。 ◎ Hollow glass RX - 868 butyl rubber is a kind of one-component, solvent free, not out of the fog, sulfide, has a permanent plastic hollowglass in the first line of sealant. Hollow glass RX - 868 butyl rubber in a wider temperature range its plasticity and sealing, and the surfacecracks, the same hard, excellent aging resistance. It on the glass, aluminum alloy, galvanized steel, stainless steel materials such as excellent?adhesion. 產品特性 Product features ◎抗紫外線性能強。 ◎?qū)ΣＡ?、鋁和不銹鋼有超強的粘接力。 ◎攝氏100C不流淌，一40℃不硬化、不開裂。 ◎Uv resistance is strong. ◎To glass, aluminum and stainless steel with super glue relay. ◎At 100 C is not flowing, and 40℃?hardening, cracking. 使用范圍 Using range ◎本產品用于中空玻璃第一密封，可以與雙組份硅酮中空密封膠、雙組份聚硫膠、雙組份聚胺脂密封膠和單組份熱熔膠相配和使用，完成全雙道密封，用本產品制作的雙道密封中空玻璃，經國家玻璃檢測中心測試合格，滿足國標各項要求。 ?◎This product is used for the first sealed insulating glass, hollow with a two-component silicone sealant, a two-component polysulfide?rubber, a two-component polyurethane sealant and one-component hot melt adhesive suitable and use, to complete the whole double seal.?with the word of this product is made of double sealed insulating glass, upon passing the national glass inspection center testing, meet the?national standard requirements. 使用方法 Method of use ◎鋁隔條清潔干凈備用。 ◎丁基膠放入擠出機紅內加熱到115°C-140C，溫控器保持恒溫后，打出膠條檢查均勻不斷線時，將膠條涂抹到鋁隔條槽上，稍放涼后與干凈的玻璃壓合成中空玻璃半成品，待涂完外道密封膠并固化后即為中空玻璃成品。 ◎做雙道中空玻璃之前，必須對雙道密封膠進行必要的相溶性試驗，延長中空玻璃的使用壽命。 ?◎Aluminum crosser clean. Set aside. ?◎Butyl rubber into the extruder cylinder heated to 115 C to 140 °C, the thermostat to maintain constant temperature, after playing strip?check the uniform continuous line, the aluminum strip daub to every article of the tank, after a little cool and clean glass pressure synthesis?of hollow glass semi-finished products, to apply the outside lane is the insulating glass sealant and after curing the finished product. ◎ Do double hollow glass before, must be necessary intermiscibility test was carried out on the double sealing glue, prolong the service life?of hollow glass.